Bio Medical Waste Inineration 100kgs per hour with Water Wet Scrubber System Model TS100 PLC for COVID 19

Bio Medical Waste Inineration 100kgs per hour with Water Wet Scrubber System Model TS100 PLC for COVID 19

Items/Model

TS100(PLC)

Picture

 

Principle

Medical  Waste Incineration Treatment

Burn Rate

Average 100 kg/hour

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

1200L

Internal Dimensions

120x100x100cm

Secondary Chamber

600L

Smoke Filter Chamber

Yes(Dry Scrubber)(wet Scrubber Optional)

Feed Mode

Manual

Voltage

220V/380V

Power

0.7Kw

Oil Consumption (kg/hour)

average 20.4

Gas Consumption (m3/hour)

***

Temperature Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

200L

Feed Door

80x60cm

Chimney

10Meter

Chimney Type

Stainless Steel

1st. Chamber Temperature

800–1000

2nd. Chamber Temperature

1000-1200

Residency Time

2.0 Sec.

Gross Weight

6000kg

External Dimensions

260x150x180cm

Small Waste Incinerator infectious Waste General hospital

1.1Incineration  caoacity (rate1200k!!/hr
1.2Target Waste Characteristics 〔a〕Human anatomical waste, Microbiological infectious Waste, Non- anatomical     
infectious    Waste,     General    hospital
waste and (b〕 low degree caloric value:
4 000  5 000 cal/kg
1.3Number  of  primary  combustion  chamber,  2〔each havine: SOOkg canacitvl
1.4Incineration method :Pyrolysis gasification combustion
1.5Number   of   combustion   stages:2   (Primary   and secondarvl
1.6Incineration  temperature:designed  to  operate  at 950degree centigrade (May go upto 1300
「Pn ti口r:::i rlρ1
1.7Volume reduction:99-95% (or 1- 5% ash
1.8Operation condition:Z 24 Hr/Dav
1.9Electricity requirement:AC 380V x 3PH x SOHz, AC 220V x lPH x 50Hz
1.10Ignition fuel:Light oil or Kerosene
1.11Emission: Smokeless& odorless perfect combustion
1.12Control  system:  Automatic  control  function  with central control nanel
1.13Fuel economy:Excellent equipment with minimum fuel consumotion
Incinerator comprising of a two-stage unit of a primary loading chamber and a secondary after burner chamber. The after-
burner system draws hot gases from the primary  chamber and ensures a clean burn at 850-1150 degrees Celsius.Prefabricated 
robust mild steel casing not less than 10mm, seam welded and suitably stiffened / braced where necessary. Steel structured 
painted using high grade paint system. Primary and secondary chamber lining thickness of not less than 180mm, rated at 1430 
degrees Celsius. At least three layers of refractory lining in the primary and secondary chambers of not less than 180mm 
total thickness providing increase fuel efficiency. Lightweight resilient refractory fibre insulation lid providing a tight 
seal giving thermal efficiency. Weather proof combustion fuel pipes and electrical systems to resist marine type of weather.
Primary Chamber:
Fully insulated internal refractory lining, constructed from high grade refractory brick. High alumina content refractory 
bricks. Manual operated access lid. Waste ignition burner, temperature controlled on and off with internal air fans.
Secondary Chamber:
Fully insulated internal refractory lining, constructed from high grade low thermal mass insulation. Secondary chamber 
burnout burner, temperature controlled on and off with internal air fans. Integrated combustion burner air fans with an 
automatically controlled distribution. Temperature sensor mounted at the top of the chamber ensuring the chamber reaches the 
necessary temperature 850 / 1100 Degrees Celsius minimum.

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/ 

Nanjing Clover Medical Technology Co.,Ltd.


 

2020-07-11

N95 Mask Machine and Disposable Mask Machine and 400mm and 1600mm Melt blown Production Line and ES Fiber Production Line

1. N95 and Disposable Mask Machine

 

2. 400mm and 1600mm Melt blown Production Line

3. ES Fiber Production Line

 

 

 

N95 Face Mask Machine Production Line

Melt blown Production Line

 

A.)Optional Capacity: 1600mm

Efficiency: 95-97%

FOB Term Price: USD per set

Price Valid: 5days.

Ave.60 Days ready for shipping.

In stock Price: USD per set

 

 

B.)Optional Capacity: 400mm

Efficiency: 40-50% .

FOB Term Price: USD per set

Price Valid: 5days.

Ave.20 Days ready for shipping.

Payment: TT 70% In advance, TT 30% before leave factory

Shipping: 1*20′ container per set, Ave. 2000Kgs.

 

Main Parts: Extruder, mold, winder, oven, ultrasonic

Daily Capacity100-150Kgs/24Hours

Screw extruder100-150Kgs

Motor power: 15KW frequency conversion speed regulation
Reducer speed ratio: 1:10 or 1:16
Screw length to diameter ratio: 30: 1
Screw diameter: 50mm
Winding machine diameter:
630mm
Winding machine drive motor power: 0.55kw
Speed ratio of winder drive reducer (if any): 1:71
Air heater power: 15kw
Power of vacuum calciner: 12kw
The size of vacuum calciner: 500 × 300 × 200
Ultrasonic power: 1800, frequency 28kHZ
Ultrasonic sink size: 800 × 300 × 250

 

 



HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-20

N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set

N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set

N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set

Dimension(L*W*H): 1037*855*1780

Power Supply 15.3kw mono phase

Net Weight: approx.: 1500kg

HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-10

KN95 Melt Blown Respirator machine

Zhangjiagang Tengxiang Machinery Co., Ltd.
Mobile: 0086-13962221749(whatsapp)
Wechat: chncheumg

平面口罩机参数:

Semi-Automatic Mask Machine

Power supply: 3.3KW mono phase

Mask Size: 175mm*80-100mm (two or three layers)

Nonwoven (GMS): 10-50g

Capacity: 120 to 150pcs/min

Dimension(L*W*H):3800mm*500mm*1400mm

Net Weight: about 1000kg

 

焊接机参数:

Welding Machine

Capacity: 5 to 10pcs/min

Power supply: 8.5KW mono phase

Compressed Air connection: 0.5 to 0.7Mpa

Dimension(L*W*H): 900mm*650mm*1380mm

Net weight: approx. 50kg

 

KN95口罩机参数:

N95 Mask Machine

Capacity: 130 to 160pcs/min

Dimension(L*W*H): 1037*855*1780

Power Supply 15.3kw mono phase

Net Weight: approx.: 1500kg

3layer Facial mask machine


Two ply Breathing mask machine

Two ply Mask machine

Two ply Respirator machine

Two ply Face mask machine

Two ply Facial mask machine


Three ply Breathing mask machine

Three ply Mask machine

Three ply Respirator machine

Three ply Face mask machine

Three ply Facial mask machine




2ply Melt Blown Breathing mask machine

2ply Melt Blown Mask machine

2ply Melt Blown Respirator machine

2ply Melt Blown Face mask machine

2ply Melt Blown Facial mask machine


3ply Melt Blown Breathing mask machine

3ply Melt Blown Mask machine

3ply Melt Blown Respirator machine

3ply Melt Blown Face mask machine

3ply Melt Blown Facial mask machine


2layer Melt Blown Breathing mask machine

2layer Melt Blown Mask machine

2layer Melt Blown Respirator machine

2layer Melt Blown Face mask machine

2layer Melt Blown Facial mask machine


3layer Melt Blown Breathing mask machine

3layer Melt Blown Mask machine

3layer Melt Blown Respirator machine

3layer Melt Blown Face mask machine

3layer Melt Blown Facial mask machine


Two ply Melt Blown Breathing mask machine

Two ply Melt Blown Mask machine

Two ply Melt Blown Respirator machine

Two ply Melt Blown Face mask machine

Two ply Melt Blown Facial mask machine




3layer Melt Blown Breathing mask making machine

3layer Melt Blown Mask making machine

3layer Melt Blown Respirator making machine

3layer Melt Blown Face mask making machine

3layer Melt Blown Facial mask making machine


Two ply Melt Blown Breathing mask making machine

Two ply Melt Blown Mask making machine

Two ply Melt Blown Respirator making machine

Two ply Melt Blown Face mask making machine

Two ply Melt Blown Facial mask making machine


Three ply Melt Blown Breathing mask making machine

Three ply Melt Blown Mask making machine

Three ply Melt Blown Respirator making machine

Three ply Melt Blown Face mask making machine

Three ply Melt Blown Facial mask making machine


Two layer Melt Blown Breathing mask making machine

Two layer Melt Blown Mask making machine

Two layer Melt Blown Respirator making machine

Two layer Melt Blown Face mask making machine

Two layer Melt Blown Facial mask making machine


Three layer Melt Blown Breathing mask making machine

Three layer Melt Blown Mask making machine

Three layer Melt Blown Respirator making machine

Three layer Melt Blown Face mask making machine

Three layer Melt Blown Facial mask making machine


N95 Melt Blown Breathing mask making machine

N95 Melt Blown Mask making machine

N95 Melt Blown Respirator making machine

N95 Melt Blown Face mask making machine

N95 Melt Blown Facial mask making machine


KN95 Melt Blown Breathing mask making machine

KN95 Melt Blown Mask making machine

KN95 Melt Blown Respirator making machine

KN95 Melt Blown Face mask making machine

KN95 Melt Blown Facial mask making machine


FFP2 Melt Blown Breathing mask making machine

FFP2 Melt Blown Mask making machine

FFP2 Melt Blown Respirator making machine

FFP2 Melt Blown Face mask making machine

FFP2 Melt Blown Facial mask making machine


Surgical Breathing mask

Surgical Mask

Surgical Respirator

Surgical Face mask

Surgical Facial mask


Breathing mask

Mask

Respirator

Face mask

Facial mask


Disposable Surgical Breathing mask

Disposable Surgical Mask

Disposable Surgical Respirator

Disposable Surgical Face mask

Disposable Surgical Facial mask


Disposable Surgical Breathing mask machine

Face Mask Machine for Coronavirus Disease COVID-19



HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-06

Incinerator shipping

HICLOVER now offer a full range of containerized incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerization enables immediate waste management as the units are pre-assembled and pre-installed.
Containerization is the most feasible and viable option in contrast to the construction of on-site facilities and housing structures, eliminating the man power and costs involved. The system has the added benefit of total mobility (both local and international), and is ideal for military and civil camps and remote locations where infrastructure is scarce.


It features unique and advanced merits with compact size, high burning effect, reasonable burning technology, high degree of non-harm etc.It is an ideal choice for waste treatment of hospitals, hotels and various areas.

Features:

(1)   Gasifiedpyrolysis incineration is used for burning many kinds of waste.
(2)   Waste can be burned once everyday by gasified incineration.
(3)   Gasified incineration, mixed incineration and burnout treatment ensures low emission standard of dust,dioxin etc.
(4)   Totally enclosed operation is suitable for treating infectious waste to avoid secondary pollution.

(5)   Compact structure and small land occupation.

WWW.HICLOVER.COMWaste Incinerators Auto Roll Air Filters
Nanjing Clover Medical Technology Co.,Ltd.

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity(Average) 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800–1000 800–1000 800–1000 800–1000 800–1000
2nd. Chamber Temperature 1000-1200 1000-1200 1000-1200 1000-1200 1000-1200
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

Hiclover mobile containerized incinerator

● Double Combustion Chamber

All waste incinerator design with double combustion chamber. High Temperature, Smoke Treatment,No black smoke, Environmentally friendly. 
● Containerized Mobile Incinerator
The incinerator mounted in ISO Container before leave factory, free-installation, no incineration house build construction,movable by truck. 
● Family Pet Dog&Cat Cremation
Special design with movable platform, combustion chamber material and custom made for pets crematory business. 
● Installation and Commissioning
Clover’s engineers instal,train for most of the region and free-cost train in our factory.